A heat pump can remove the uncertainty of oil and LPG deliveries, but it does make your electricity tariff more significant. The right deal can reduce the cost of heating your home without asking you to compromise on comfort. This guide to heat pump tariffs explains what to look for, where the savings come from and why the cheapest headline unit rate is not always the best choice.

For homes across Essex, Suffolk, Hertfordshire and Kent, the answer will depend on the building, the heating controls, household routines and whether you have solar panels or an electric vehicle. A tariff should work with the way your heat pump operates, rather than forcing your household into an inconvenient routine.

Why heat pump tariffs work differently

A heat pump runs on electricity, using it to move heat from the air or ground into your home. Because it produces several units of heat for each unit of electricity it uses, it can be an efficient replacement for an oil, LPG, gas or direct electric heating system. However, electricity prices can vary considerably by tariff and by time of day.

A standard single-rate tariff charges the same price for every kilowatt-hour, whatever the time. A heat pump tariff, or time-of-use tariff, offers cheaper electricity during selected off-peak periods and higher prices at busier times. Some have set overnight windows; others use prices that change every half hour.

This can suit a heat pump well because much of its work can be planned. Hot water can often be heated at lower-cost times, and a well-insulated home can store warmth in its structure, radiators or underfloor heating. The key is to shift sensible demand, not to let rooms become cold simply to chase a lower rate.

The main types of heat pump electricity tariff

There is no single ‘best’ heat pump tariff. Suppliers structure their offers differently, and availability can depend on your meter, region and whether you already have other technology such as an EV charger.

Fixed and standard variable tariffs

These are the simplest options. You pay one rate for electricity all day, plus a daily standing charge. They are often a sensible starting point for a household that wants predictable bills, does not have a smart meter, or prefers not to change heating schedules.

A fixed tariff gives certainty for an agreed period, while a standard variable tariff can rise or fall over time. Neither is designed specifically for heat pumps, but both can be appropriate where household electricity use is spread evenly through the day.

Economy 7 and other two-rate tariffs

Economy 7 offers a cheaper overnight rate and a more expensive daytime rate. It may suit homes with underfloor heating, a hot-water cylinder or electric vehicle charging that can reliably use electricity overnight.

The trade-off is straightforward: daytime electricity may cost more. If your heat pump does most of its work on cold winter mornings and evenings, and you cannot move enough consumption into the cheaper period, an Economy 7-style tariff can cost more overall. Check the actual off-peak hours too. They are not always the same in every area or on every meter.

Time-of-use and smart tariffs

Smart tariffs use a smart meter to record electricity use in half-hourly periods. Some offer a predictable cheap window; others have prices that vary according to wholesale market conditions. These tariffs can reward households that are comfortable using controls and scheduling appliances around price changes.

They are not automatically low-cost. On a variable-rate tariff, peak periods can be expensive, particularly on winter evenings when homes need heat most. Before choosing one, consider whether your heating controls can respond automatically and whether you are happy to monitor prices or accept occasional higher rates.

Heat pump-specific tariffs

Some suppliers offer tariffs designed around heat pumps. These may provide a lower rate for a set number of hours, sometimes with controls that communicate with compatible heating equipment. They can be attractive, but read the eligibility conditions carefully. You may need a particular smart meter set-up, a compatible controller, or to allow the supplier limited control over when the system runs.

This does not mean giving up comfort. A properly designed system should protect agreed room temperatures and hot-water requirements. Still, it is worth understanding exactly what control you retain before signing up.

What to compare beyond the unit rate

It is tempting to compare one advertised electricity price and make a quick decision. A useful tariff comparison needs a fuller picture.

First, look at the day rate, off-peak rate and standing charge together. A low night rate can be offset by a high daytime rate or a higher daily charge. Then check how long the offer lasts, whether there are exit fees, and whether the supplier can change the off-peak window.

Next, consider how much electricity your heat pump is likely to use at each time of day. This is more useful than looking only at total annual consumption. A household that heats hot water overnight, has underfloor heating and charges an EV may benefit greatly from cheap overnight power. A family at home throughout the day with radiator heating may use a larger share at the peak rate.

Also include the rest of the home. Cooking, washing, tumble drying, home working and EV charging all affect the outcome. If you are removing a gas boiler entirely, remember that you may no longer need to pay a separate gas standing charge. That saving belongs in the wider running-cost calculation.

Getting your heat pump ready for off-peak electricity

A tariff cannot correct a poorly designed heating system. Heat pump efficiency begins with an accurate heat-loss assessment, correctly sized equipment and emitters that can provide enough heat at lower water temperatures. Insulation, draught reduction and sensible ventilation are equally relevant, especially in older homes.

Once the system is designed properly, controls can help it use cheaper electricity without reducing comfort. Your installer may schedule domestic hot water heating for lower-price periods, provided there is enough stored hot water for the household. In homes with underfloor heating, the floor can warm gently before a more expensive period and release heat gradually afterwards.

Radiator-based systems can also benefit, but they usually have less thermal storage. Large temperature setbacks are rarely helpful. A heat pump normally works most efficiently when maintaining a steady indoor temperature rather than racing to reheat a cold house. On very cold days, forcing the system to wait for a cheap tariff window may increase electricity use or leave the home less comfortable.

Weather compensation is particularly valuable. This control adjusts the heating water temperature in response to outdoor conditions, helping the heat pump run steadily and efficiently. It should be set up and reviewed as part of commissioning, not left as an afterthought.

Solar panels, batteries and export payments

If you have solar PV, your tariff decision becomes more individual. Using solar electricity directly in the home can reduce the electricity bought for daytime heating and hot water, particularly in spring and autumn. Winter solar generation is lower, however, just as heat demand rises, so it should not be treated as a complete answer to winter heating costs.

A battery may allow some daytime solar generation or cheap overnight electricity to be used later. Whether it pays back depends on battery size, tariff spreads, export payments and household demand. In some cases, exporting solar power can be worth more than storing it; in others, using it for hot water or household electricity makes better financial sense.

The important point is to consider electricity import, export and heating controls together. Choosing a tariff for the heat pump without considering solar generation can leave value on the table.

Questions to ask before switching tariff

Before changing supplier or tariff, ask for clear answers to the practical points that affect your household:

  • Do I need a smart meter, and can it record half-hourly electricity use?
  • What are the exact cheap-rate periods, including weekends and winter days?
  • What will I pay at peak times, and is the rate fixed or variable?
  • Can my heat pump controller schedule hot water and heating around those periods?
  • Are there compatibility rules, exit fees or supplier control requirements?
  • How would this tariff work alongside solar PV, battery storage or EV charging?

Keep at least several months of electricity readings or smart-meter data where possible. This gives a more realistic view of your current pattern than a supplier estimate alone. After installation, monitor the first heating season as well. Small changes to hot-water timing, flow temperatures and heating schedules can make a meaningful difference.

A whole-house view makes tariff choices clearer

The best tariff is usually the one that complements the home you actually have. A detached rural property replacing oil heating may have very different needs from a well-insulated new-build with solar PV and underfloor heating. Likewise, a tariff that works well for an electric vehicle owner may not be right for a household with high early-evening electricity use.

At Baddow Eco Solutions, we look at the building, occupants, heating demand and longer-term running costs before recommending a low-carbon system. That same approach should guide tariff selection. Your installer can explain what the heat pump controls can do, while your energy data helps show when it makes sense to run them.

A good tariff should make low-carbon heating feel easier to live with: a warm home, dependable hot water and fewer worries about fuel deliveries. If the choices feel complicated, start with your household routine and let that, rather than an eye-catching headline rate, lead the decision.